Transactions of Nonferrous Metals Society of China (中国有色金属学报)•2026•DOI: 10.1016/S1003-6326(26)67066-5
Oxidation roasting of bastnaesite was conducted to evaluate its impact on surface characteristics and flotation behavior. Experiments varied temperature, time, and O2 concentration. Increasing temperature promoted thermal decomposition, yielding Ce7O12, RE2O3, and REF3 as main phases. The Ce oxidation degree and REO grade of roasted products exceeded 85.00%. Roasting induced long, narrow, nearly parallel cracks within particles, increasing porosity and causing partial fragmentation. During flotation, dissolved rare earth ion concentration increased significantly, and surface hydrolysis formed rare earth hydroxyl compounds. Complete decomposition raised the required collector dosage to achieve recovery above 85.00%. This increase is attributed to enhanced particle wettability, altered collector adsorption, and deeper penetration into the porous structure. The findings provide a basis for optimizing flotation circuits treating roasted bastnaesite, particularly in iron-bearing rare earth deposits where pyrometallurgical pretreatment is employed.
Int. Journal of Minerals, Metallurgy and Materials (矿物冶金与材料学报)•2025•DOI: 10.1007/s12613-025-3121-y
This study explores a hydrogen-assisted mineral phase transformation process with synergistic desulfurization for the efficient recovery of iron from the high-pressure acid leach (HPAL) tailings of laterite nickel ore. HPAL tailings containing 51.50wt% iron and 2.09wt% sulfur present environmental challenges due to their sulfur content. Pre-treatment at 950°C for 15 min successfully reduced the sulfur content to 0.295wt% and increased the iron grade to 57.66wt%. Further hydrogen-assisted mineral phase transformation at 520°C for 30 min, using 40vol% hydrogen and a gas flow rate of 600 mL·min–1, resulted in a product with an iron grade of 61.00wt% and 90.11% iron recovery. The overall desulfurization rate reached 85.83% when wet scrubbing and limestone were used to capture the sulfur. This study demonstrates the efficiency of this hydrogen-assisted process for sustainable iron recovery and sulfur removal from laterite nickel ore tailings, with potential for industrial applications.
Int. Journal of Minerals, Metallurgy and Materials (矿物冶金与材料学报)•2025•DOI: 10.1007/s12613-024-3018-1
As a refractory iron ore, the clean and efficient beneficiation of limonite is crucial for ensuring a sustainable long-term supply of iron metal. In this study, the microwave fluidization magnetization roasting of limonite was explored. The micromorphology, microstructure, and mineral phase transformation of the roasted products were analyzed using a scanning electron microscope, an automatic surface area and porosity analyzer, an X-ray diffractometer, and a vibrating sample magnetometer. Kinetic analysis was also conducted to identify the factors limiting the roasting reaction rate. Microwave fluidization roasting significantly increased the specific surface area of limonite, increased the opportunity of contact between CO and limonite, and accelerated the transformation from FeO(OH) to α-Fe2O3 and then to Fe3O4. In addition, the water in the limonite ore and the newly formed magnetite exhibited a strong microwave absorption capacity, which has a certain activation effect on the reduction roasting of limonite. The saturation magnetization and maximum specific magnetization coefficient increased to 23.08 A·m2·kg−1 and 2.50 × 10−4 m3·kg−1, respectively. The subsequent magnetic separation of the reconstructed limonite yielded an iron concentrate with an Fe grade of 59.26wt% and a recovery of 90.07wt%. Kinetic analysis revealed that the reaction mechanism function model was consistent with the diffusion model (G(α) = α2), with the mechanism function described as k = 0.08208exp[−20.3441/(RgT)]. Therefore, microwave fluidization roasting shows significant potential in the beneficiation of limonite, offering a promising approach for the exploitation of refractory iron ores.
Int. Journal of Minerals, Metallurgy and Materials (矿物冶金与材料学报)•2025•DOI: 10.1007/s12613-024-3053-y
Hydrogen-based mineral phase transformation (HMPT) technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores. However, further research is needed to clarify the phase composition and floatability of rare earths obtained after HMPT owing to the associated phase transformations. This study explored the mineralogical characteristics and separation behavior of rare earths in HMPT-treated iron tailings. Process mineralogy studies conducted via BGRIMM process mineralogy analysis and X-ray diffraction revealed that the main valuable minerals in the tailings included rare-earth oxides (9.15wt%), monazite (5.31wt%), and fluorite (23.52wt%). The study also examined the impact of mineral liberation and gangue mineral intergrowth on flotation performance. Flotation tests achieved a rare-earth oxide (REO) grade of 74.12wt% with a recovery of 34.17% in open-circuit flotation, whereas closed-circuit flotation resulted in a REO grade of 60.27wt% with a recovery of 73%. Transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy revealed that monazite remained stable during the HMPT process, while bastnaesite was transformed into Ce7O12 and CeF3, leading to increased collector consumption. Nonetheless, the HMPT process did not significantly affect the flotation performance of rare earths. The enrichment of fluorite in the tailings highlighted its further recovery potential. The integration of HMPT with magnetic separation and flotation presents an efficient strategy for recovering rare earths, iron, and fluorite from Bayan Obo ores.
Int. Journal of Mining Science and Technology (采矿与安全工程)•2024•DOI: 10.1016/j.ijmst.2024.12.006
The storage of solid waste in Bayan Obo has resulted in significant resource wastage and environmental concerns. In this study, an efficient process was developed to recover iron and rare earth elements (REEs) from this waste by processes of hydrogen-based mineral phase transformation (HMPT), magnetic separation, and flotation. Under optimal HMPT conditions (525 °C, 12.5 min, and 30% H2 concentration), an iron concentrate with a TFe grade of 64.09% and a recovery of 95.33% was obtained. The magnetic properties of the solid waste were greatly enhanced by HMPT, allowing the effective magnetic separation of iron minerals. Further optimization of the flotation process resulted in a REEs concentrate with a rare earth oxide (REO) grade of 65%–70% and a REEs recovery of 60%–65%. Hematite was reduced to magnetite during HMPT, and bastnaesite was decomposed to REEs oxides and fluorides, and the particle structure was significantly destroyed. However, changes in monazite, fluorite, and barite were minimal.