Key Takeaways & Executive Findings
- •• Amorphous Bi nanoparticles anchored on N-doped graphite felts significantly inhibit the hydrogen evolution reaction and enhance the electrochemical activity of Cr3+/Cr2+ and Fe2+/Fe3+. • The optimal Bi/N ratio of 2 yields a high coulombic efficiency of 97.7% and an energy efficiency of 85.8% at 60 mA cm−2. • The modified electrode achieves a capacity of 862.7 mAh L−1 after 100 cycles, about 5.3 times that of bare graphite felt. • The combined effect of Bi and N dopants reduces charge transfer resistance and improves mass transfer, leading to superior battery performance.
Abstract
Iron-chromium redox flow batteries (ICRFBs) use abundant and inexpensive chromium and iron as the active substances in the electrolyte and have great potential as a cost-effective and large-scale energy storage system. However, they are still plagued by several issues, such as the low electrochemical activity of Cr3+/Cr2+ and the occurrence of the undesired hydrogen evolution reaction (HER). We report the synthesis of amorphous bismuth (Bi) nanoparticles (NPs) immobilized on N-doped graphite felts (GFs) by a combined self-polymerization and wet-chemistry reduction strategy followed by annealing, which are used as the negative electrodes for ICRFBs. The resulting Bi NPs react with H+ to form intermediates and greatly inhibit the parasitic HER. In addition, the combined effect of Bi and N dopants on the surface of GF dramatically increases the electrochemical activity of Fe2+/Fe3+ and Cr3+/Cr2+, reduces the charge transfer resistance, and increases the mass transfer rate compared to plain GF. At the optimum Bi/N ratio of 2, a high coulombic efficiency of up to 97.7% is maintained even for 25 cycles at different current densities, the energy efficiency reaches 85.8% at 60.0 mA cm−2, exceeding many other reported materials, and the capacity reaches 862.7 mAh L−1 after 100 cycles, which is about 5.3 times that of bare GF.
1. Introduction
The development of clean energy sources is a current international priority. Renewable powers based on wind and solar generation are now becoming primary energy sources for powering our societies. However, the inherent intermittency of renewable energy sources brings about serious challenges for ensuring a consistent supply of power to the grid. Energy storage technology is an effective tool for achieving efficient renewable energy utilization and stable power system operation[1–2]. Compared with physical energy storage technology such as pumped storage, chemical energy storage technology offers greater flexibility in terms of scale and location. Among the various chemical energy storage methods, redox flow batteries (RFBs) have become a large-scale battery energy storage technology with great potential owing to their long life, good safety, and high energy efficiency[3].
RFBs are considered as one of the best choices for megawatt-level power storage, and megawatt demonstration systems have been installed, for example, in China, the United States and Australia. The charge and discharge of the RFBs are realized mainly by the change in the redox state of the active substance in the solution on both sides of the positive and negative electrodes. An RFB consists of two electrodes, two electrolyte tanks, and an ion exchange membrane. The electrolyte is usually stored in an external tank and pumped into the reactor. The redox reaction is carried out on the electrode surface, and the active substance after the reaction flows back to the external storage tank with the electrolyte[4]. Since the 1960s, a variety of RFBs have been developed, including all-vanadium flow batteries (VRFBs), vanadium-iron R
Loading authentic research manuscript (Pages 1–5)...
CHE Hang-xin, GAO Yu-fei, YANG Jia-hui, HONG Song, HAO Lei-duan, XU Liang, Sana Taimoor, Alex W. Robertson, SUN Zhen-yu (2025). Bismuth nanoparticles anchored on N-doped graphite felts to give stable and efficient iron-chromium redox flow batteries. SinoTechIntel Verified Research. https://doi.org/10.1016/S1872-5805(NCM2024-39-01-07)
Research & Educational Purpose Only:The translations, structured abstracts, analytical annotations, and data reports provided by SinoTechIntel are intended exclusively for academic research, internal corporate R&D, and educational benchmarking. They do not constitute formal engineering, chemical safety, legal, or professional advice.
Copyright & Intellectual Property Notice: Original copyright of the underlying source articles and experimental data remains with the respective authors, institutions, and original publishing journals. SinoTechIntel claims intellectual property only over its proprietary translations, analytical syntheses, and AEO structured enhancements in accordance with international fair use and academic citation principles.
Frequently Asked Questions
What is the main challenge in iron-chromium redox flow batteries?
The main challenges are the low electrochemical activity of Cr3+/Cr2+ and the undesired hydrogen evolution reaction (HER) that reduces efficiency.
How do bismuth nanoparticles improve the battery performance?
Bismuth nanoparticles react with H+ to form intermediates that inhibit HER, and combined with N-doping, they enhance the electrochemical activity of Fe2+/Fe3+ and Cr3+/Cr2+, reduce charge transfer resistance, and increase mass transfer rate.
What is the optimal Bi/N ratio and what performance does it achieve?
The optimal Bi/N ratio is 2, achieving a coulombic efficiency of 97.7%, an energy efficiency of 85.8% at 60 mA cm−2, and a capacity of 862.7 mAh L−1 after 100 cycles.
How does the modified electrode compare to bare graphite felt?
The modified electrode achieves a capacity about 5.3 times that of bare graphite felt, with significantly improved efficiency and stability.
What is the synthesis method for the Bi/N-doped graphite felt electrode?
The electrode is synthesized by a combined self-polymerization and wet-chemistry reduction strategy followed by annealing, which immobilizes amorphous bismuth nanoparticles on N-doped graphite felts.
Related Technical Papers & Translations
A Novel Approach for Enhanced Brain Tumor Segmentation Using Multimodal MRI and Deep Learning
Brain tumor segmentation from multimodal MRI is crucial for diagnosis and treatment planning. In this study, we propose a novel deep learning framework that integrates structural and functional imaging modalities to improve segmentation accuracy. Our method employs a multi-scale attention mechanism and a hybrid loss function to handle class imbalance and boundary ambiguity. Evaluated on the BraTS benchmark, our approach achieves state-of-the-art performance, with Dice scores of 0.91, 0.87, and 0.84 for whole tumor, core, and enhancing tumor, respectively. Furthermore, we demonstrate the generalizability of our model across different scanners and protocols. Our findings suggest that the proposed method can significantly aid clinical decision-making and surgical planning.
Investigation of coupled acoustic and electrical responses and early warning approaches during re-loading of damaged coal
Initial damage from engineering disturbances in deep coal mining degrades mechanical properties and heightens dynamic-hazard risks, challenging conventional monitoring. This study probes the coupled acoustic-electrical responses of initially damaged coal under reloading and develops a multi-parameter, multi-level dynamic integrated early-warning model. Using a true-triaxial Split Hopkinson Pressure Bar (SHPB) system, we prepared specimens with graded damage by varying static deviatoric stresses and dynamic impacts. Uniaxial compression reloading was conducted with synchronous acoustic emission (AE) and resistivity monitoring. Joint time-domain responses of force, acoustics, and electricity delineated distinct loading stages. Time-frequency features were extracted via Fourier and wavelet transforms; crack architecture was quantified by 3D AE localization and fractal-dimension analysis. Initial damage markedly reduced load-bearing capacity. Resistivity decreased sharply with increasing deviatoric stress, while cumulative AE counts increased strongly. The AE spectrum evolved from bimodal to broadband with low- and high-frequency enhancement. The resistivity spectrum showed progressive bandwidth broadening, energy amplification, and high-frequency advancement. The AE spatial fractal dimension rose significantly during compaction. An integrated warning system combining multiscale entropy fusion, Temporal Convolutional Network (TCN)-Transformer forecasting, recurrence-network analysis, and a Bayesian framework yielded a 28.4 s lead time, offering a theoretical basis and technical pathway for intelligent prevention of dynamic hazards.
Influence of aggregate particle size on fracture behavior and energy evolution of cemented rockfill in the post-peak stage
Cemented rockfill (CRF) combines structural support with sustainable reuse of coal-derived solid waste. This study integrates digital image correlation, acoustic emission monitoring, and finite–discrete element simulations to investigate mechanical behavior, fracture development, and energy evolution of CRF containing 54% aggregate content with three grain-size distributions (5–10, 10–20, and 20–30 mm). Results indicate finer aggregates raise compressive strength and elastic modulus, and increase post-peak softening and residual stiffness. Fracture patterns transition from dominantly unidirectional failure in coarse specimens to pronounced X-shaped conjugate shear in fine specimens, with cracks initiating at boundaries and propagating inward. The proportion of failed joints at comparable strains decreases markedly with finer gradation, reflecting a more homogeneous crack network that enhances post-peak load retention and produces frequent minor stress fluctuations. Energy analyses reveal a coarse > medium > fine ordering in cumulative dissipation; however, finer aggregates delay rapid kinetic and dissipative energy release, promoting slower energy redistribution and improved load resistance. These findings quantify how aggregate gradation controls deformational mechanisms, crack topology, and energy partitioning, and provide design guidance for optimizing aggregate size and cementitious composition to enhance ductility, energy absorption, and structural reliability of CRF in underground engineering.